HO LED-APP (Mobile Version)Fountain Control User Manual

Step 1: Tap the three-line menu icon(initial Interface)

Step 2: Select Language

Step 3: Multiple languages available

Notes:

• lfthe remote control is already connected to the controller. themobile app cannot connect to the controler, Please eave the remotecontrol idle for approximately 3 minutes until it disconnects, afterwhich the mobile app can connect.
• After the mobile app is connected to the controller, the remotecontrol will not be able to connect.To reconnect the remote control,.please exit the app and wait about 3 minutes, then press the remotecontrol power button multiple times until pairing is successful.

Step 1: On the initial interface, tap the “+" button in the upper-right corner.

Step 2: Scan for nearoy powered-on controllers.

Step 3: Tap the three-dot icon in the top-right corner.

Step 4: Add all scanned devices

Step 5-6: As shown in Figures 5-6, tap to enter and control the mainpower switch of the fountain.

1. Light on /off
2. Touch Color Change
3. Custom Color
4. Brightness Adjustment
5. Lighting Mode

1. preview animation
2. Fixed water spray height
3. Fountain Mode
4. Adjust

Lighting Output has 3 modes (1)

• On: Turns on the lighting.
• Auto: Set a timer (e.g.3/4/5/6 hours). After setting the timer, select Automode and the lighting will operate according to the preset schedule.
• Light Control: Set a timer (e.g.3/4/5/6 hours). After setting the timer,select Light Control mode. The controller will sense ambient light, turning thelights on at night and off during the day.

Light Control Threshold (2):

Adijusts the sensitivity of the light control function. The default value is 35.

• When the environment is darker, decrease the value.
• When the environment is brighter, increase the value.

Fountain Output has 3 Modes (1):

• Off: Turns off the fountain.
• On: Turns on the fountain.
• Auto: Set a timer (e.g.3/4/5 hours).
  After setting the timer, select Automode and the fountain will operate
  according to the preset schedule